Skip to content

Backyard Embers

How to Season a Blackstone Griddle for the First Time: Coats, Oil & Timing (2026)

Short answer: season a new Blackstone-style flat-top griddle by washing it once with soap and water (the only time soap ever touches it), heating it on high until the surface starts to discolor, letting it cool, then applying 3–4 thin coats of oil, each heated on high until it stops smoking before the next. After that, you don’t re-season from scratch after every cook: clean while warm and rub on a thin protective coat of oil, and season it again after removing rust.

A flat-top griddle is a different surface from a cast-iron grill grate. If you’re seasoning grill grates instead, see our how to season a grill (and new grates) guide rather than following this one for that job. If you own a different brand of flat-top and want the general steel-seasoning theory, oil comparisons and rust-troubleshooting that goes beyond Blackstone specifically, see our how to season a flat-top grill guide.

Griddle seasoning vs. grill-grate seasoning: different surface

Blackstone’s griddle top is a flat steel plate. If you own both a grill with bare cast-iron grates and a flat-top griddle, treat them as two separate jobs: this guide is for the griddle plate specifically.

What you’ll need, at a glance

Step What to do Time
First-time wash Soap + water, once only — never again after this Until clean, then dry completely
Initial heat High heat until the plate starts to discolor 10–15 minutes
Oil per coat The thinnest coat you can spread — wipe up any drops or pooling —
Smoke-off per coat Let it smoke until the smoke stops Until the smoke stops (Blackstone’s seasoning-frequency guide: 10–15 minutes or until it stops smoking)
Total coats (new griddle) Repeat the thin-oil-and-heat cycle 3–4 coats
Figures are Blackstone’s own published guidance for a standard flat-top griddle; check your model’s manual for anything specific to your size.
A flat-top griddle surface catching warm ember light at dusk, with a thin sheen of seasoning oil
A thin, even sheen of oil is what you’re building toward — not a heavy, glossy coat.

How to season a new Blackstone griddle, step by step

1. Wash it once with soap and water — the only time you ever will

Blackstone says its griddles ship pre-seasoned with cooking oil to prevent rust and damage during shipping. Wash the whole cooking surface with warm water and a little dish soap, rinse thoroughly, and dry completely with paper towels. This is genuinely the one and only time soap belongs on this surface.

2. Heat on high until the plate starts to discolor (10–15 minutes)

With the griddle dry, turn all burners to high and let it run until the bare steel begins to darken slightly. Blackstone says this burns off the water and makes the griddle ready to accept the seasoning. Once the steel darkens, turn the burners off and let the griddle cool before the first coat of oil.

3. Apply a thin coat of oil

Using tongs and a folded paper towel or cloth, spread a thin layer of oil across the entire surface, including the edges, and wipe up any drops or pooling. Blackstone’s seasoning guide lists its own Griddle Seasoning & Cast Iron Conditioner, canola, flax, vegetable oil, shortening and olive oil. Whichever you choose, thin is the goal: Blackstone says to use the paper towel as if you were trying to wipe all the oil off the surface.

4. Let the coat smoke off completely

Turn the burners back to high and let the oil smoke until the smoke stops on its own; Blackstone’s care guide says the griddle discolors as the oil smokes, which means the oil is bonding to the metal. Don’t add the next coat while the current one is still smoking.

5. Repeat for 3–4 total coats

Apply another thin coat the same way and let it smoke off, then repeat. Blackstone says three to four coats turn the surface dark and smooth, which is the sign the griddle is seasoned.

6. Turn off the heat and let it cool fully

Once the last coat has stopped smoking, shut off the burners and let the griddle cool completely before you touch it, cover it, or put tools away. A freshly seasoned surface is still very hot.

7. Cook on it — cooking itself adds seasoning

Your first few cooks continue building the seasoning layer. Blackstone’s care guide says the more often you cook on and season your griddle, the more non-stick the surface will become.

8. After every cook from here on: clean warm, then a thin oil coat — not a full re-season

While the griddle is still warm, scrape off food debris, wipe it down, and rub on a very thin layer of oil before it goes cold. That’s routine maintenance, not seasoning from scratch, and it’s what actually keeps the surface protected between cooks. See the FAQ below for when a full re-season is actually warranted.

Spreading a thin layer of oil across a flat griddle surface with a folded cloth
Tongs and a folded cloth or paper towel — no special tools needed to apply the oil.
Faint smoke rising off a hot griddle surface during a seasoning heat cycle
Let each coat smoke until it stops on its own before adding the next one.

The mistake to avoid: too much oil

A heavy coat looks more thorough, but Blackstone’s seasoning guide warns that a thick coat of oil leads to future chipping and a build-up of sticky gunk on the griddle plate.

Close-up of a dark, smooth seasoned flat griddle surface
A dark, smooth seasoned griddle surface.

Safety: smoke, propane and oily rags

A seasoning session produces real smoke for a sustained stretch, so treat it like any other high-heat cook: outdoors only, never in a garage, shed or other enclosed space — CPSC describes carbon monoxide as a deadly, colorless, odorless gas produced by the burning of fuels that include propane. Give it the clearance from siding, railings and anything flammable that your manual specifies, and don’t leave a seasoning cycle unattended.

If your griddle runs on propane, Blackstone’s griddle safety guide says to check for leaks before each use by brushing a soap-and-water mix on the connections, including the hose; bubbles mean a leak, and it says to shut off the tank and contact your propane supplier. Our propane & charcoal grill safety guide covers the full leak-check routine, clearance distances and carbon-monoxide risk in more depth if you want it.

The cloths and paper towels you use to apply and wipe off seasoning oil are their own fire hazard. CPSC warns that cloths soaked with vegetable oil can catch fire if heated or left in a pile while still warm, and says not to pack them tightly in the trash. Massachusetts fire-safety guidance, written for paint and varnish rags, says to hang oily rags outside to dry or spread them out flat, not in a pile.

An oily cloth laid flat to dry outdoors
CPSC: cloths soaked with vegetable oil can catch fire if left in a pile while still warm, so don’t pack them tightly in the trash.

The gear that helps

Beyond the griddle itself, a dedicated bottle of high-smoke-point seasoning oil (kept just for this job, not whatever’s open in the kitchen) and a proper metal scraper make the whole routine easier. If you’re also protecting the griddle between cooks, our best grill covers guide covers weatherproofing for flat-top and cart-style units alike.

We earn a commission if you buy through links on this page, at no extra cost to you. It never affects which products we pick or how we rank them. Read our full disclosure policy.

Check flat-top griddle seasoning oil & conditioner on Amazon →

New grates instead of a griddle plate? See how to season a grill (and new grates) for the cast-iron version of this job. Own a different flat-top brand and want the general steel-seasoning theory and rust troubleshooting? See our how to season a flat-top grill guide. Running a gas or propane appliance generally? Our propane & charcoal grill safety guide covers leak-checks and clearance in full. Looking for more backyard-cooking technique? Browse our Technique hub, or stock up on a jar from our best BBQ rubs & seasonings guide while the griddle’s still warm. Shopping for the griddle itself? See our best flat-top griddles guide for verified, currently-sold picks, or our Black Friday griddle buying guide to compare Blackstone sizes against a Pit Boss four-burner before you shop. Our How We Choose page explains the research behind every recommendation on this site.

Frequently asked questions

How many coats does a new Blackstone griddle need?

Blackstone says three to four thin coats, each heated until the smoke stops before the next goes on; its seasoning-frequency guide puts each coat at 10–15 minutes or until it stops smoking.

What oil should I use to season a griddle?

Blackstone’s seasoning guide lists its own Griddle Seasoning & Cast Iron Conditioner, canola, flax, vegetable oil, shortening and olive oil, and its printed care guide adds coconut oil, sesame oil and lard. Whatever you use, apply it thin.

How often should I re-season a Blackstone griddle?

Not after every cook. The routine maintenance habit — scrape and wipe while warm, then a thin coat of oil — is what keeps a griddle protected day to day. Blackstone says that with routine cleaning and maintenance a griddle shouldn’t need re-seasoning; the case it does give is after you’ve scrubbed off rust, when you season the top again.

Do I really need to wash a new griddle with soap first?

Yes — a brand-new Blackstone ships with a protective coat of cooking oil, and Blackstone’s printed guide says to wash it in hot, soapy water before first use. It’s the one and only time soap should touch the surface; after that, Blackstone’s care guide says there isn’t any reason to use it, so plain water is all a seasoned griddle needs.

Is griddle seasoning the same as seasoning grill grates?

The surface is different. Blackstone’s griddle top is one flat steel plate. See our how to season a grill (and new grates) guide if it’s grates you’re working on.

Why is my griddle sticky after seasoning instead of smooth?

Too much oil per coat is the cause Blackstone warns about: its seasoning guide says a thick coat leads to future chipping and a build-up of sticky gunk.

Can I season a griddle indoors or in a garage?

No. CPSC says carbon monoxide is a colorless, odorless gas produced by burning fuels such as propane. Season outdoors only, with the same clearance from anything flammable that your manual specifies for normal cooking.

Are the oily rags from griddle seasoning a fire risk?

Yes. CPSC warns that cloths soaked with vegetable oil can catch fire if heated or left in a pile while still warm, and Massachusetts fire-safety guidance, written for paint and varnish rags, says to hang them outside to dry or spread them out flat rather than leave them in a pile.

Sources

Seasoning steps, coat count, timing and oil options from Blackstone Products — How to Season Your Griddle: Complete Guide and Blackstone Products — How often does a griddle need to be seasoned?. First-use wash instructions from the Blackstone Griddle Care & Seasoning Guide (manufacturer PDF via Home Depot), which states plainly that the first-use soap wash is “the only time you should use soap on the griddle.” Routine after-cook maintenance and rust guidance from Blackstone Products — How often does a griddle need to be seasoned? and Blackstone Products — How to Take Care of Your Griddle: Complete Guide. Oily-rag fire-safety guidance from the Massachusetts Department of Fire Services — Disposing of oily rags, with the underlying hazard also documented by the U.S. Consumer Product Safety Commission. Propane leak-check guidance from Blackstone Products — How to Griddle Safely; carbon monoxide facts from the U.S. Consumer Product Safety Commission — Carbon Monoxide Fact Sheet. Details were current at the time of research (August 2026); the Blackstone citations were re-checked in October 2026.

As an Amazon Associate I earn from qualifying purchases.